Speaking of curing agent flooring, I believe that some owners are not unfamiliar, it is used in many modern workshops and factories, in order to have a good environment, the decoration needs to pay more attention to, then the construction process of curing agent flooring is how? What are the precautions?

　　Curing agent flooring construction process

　　1、Grass-roots level treatment

　　Use professional cleaning tools to clean up the debris and dust on the ground, knock off some loose parts of the ground, then use cement mortar and floor repair agent to repair some pits and sand pits on the ground, use diamond tablets to polish them in turn, clean up all the surfaces with the uniform cross method, and then use a vacuum cleaner to suck off the dust on the ground.

　　2、One time curing

　　After diamond chip grinding, the ground should be kept clean and dry, then use the user's professional automatic sprayer or roller to spray concrete sealing layer curing agent on the ground, and must be uniform , the whole ground to keep wet about two hours, so that the curing agent completely penetrate into the ground, and then wait for the curing agent to dry for twelve hours, and then transported to the ground by the professional resin grinding discs in order to carry out the cruciform sanding, until the the floor is free of scratches or scratches are left when the cement is finished. After removing the dust, the floor can be dried.

　　3、Second curing

　　After the primary curing and drying, then use a professional sprayer or roller to spread the curing agent material evenly on the ground to keep wet, wait for two hours and then use a professional high polishing pad to quickly cross-grind the ground, and then grind off the residue on the ground, clean the ground after grinding.

　　4, Corner treatment

　　Then for the corners of the walls or columns, you need to use a portable angle grinder to polish, the finished effect will be slightly worse than the large construction, and then use a multi-functional wipe. Normal dry polishing with a machine or polisher and a hundred cloth, vacuum cleaner to remove the dust is completed.

　　curing agent Precautions for flooring construction

　 1、Concrete should be dry, clean and free of pollution before use.

　　2, before use should be thoroughly removed from other surfaces sealant, including: wax, oil, rubber, paint sealing surface adhesion. If the floor has been cleaned with acid, before use must be neutralized acid sealer construction only after mixing.

　　3, if you want to seal and sealing curing agent floor construction, you must use chemical or mechanical methods to completely remove these layers, and then can only use sealed curing agent.

　　4、Concrete sealing curing agent is only applicable to concrete structures on the floor.