HANGZHOU HENMA ELECTRIC POWER TECHNOLOGY CO., LTD

Hangzhou Henma Power Technology Co., Ltd.

NEWS CENTER

The use of pipe blockers

Release time:

2021-03-18

The working principle of pipeline blocker is to use high-quality rubber made of pipeline blocking airbag by inflating method to make it expand. When the gas pressure inside the water plugging airbag reaches the specified requirements, the water plugging airbag fills the entire pipeline section, the use of pipeline blocking airbag wall and the friction generated by the pipeline to block the leakage, so as to achieve the purpose of the target section of the pipeline without water seepage.

　　plumbingblockerMade of reinforced natural rubber, each pipe sealing airbag is tested at 1.5 times the rated working pressure and the corresponding type of pipe diameter before delivery.

　　plumbingblockerThe working principle of water plugging is to use high-quality rubber made of pipeline blocking airbag by inflating method to make it expand. When the gas pressure inside the water blocking airbag reaches the specified requirements, the water blocking airbag fills the entire pipeline section, the use of pipeline blocking airbag wall and the friction generated by the pipeline to block the leakage, so as to achieve the purpose of the target section of the pipeline without water seepage.

　　plumbingblockerIs made of high quality natural rubber by high temperature vulcanization process, is strictly in accordance with the construction standards of production, has the characteristics of easy operation, strong and durable, high safety performance, high construction efficiency, reusable, saving resources, etc., the pipe blocker can also be called pipeline plugging air bag, water closure plugs, rubber water plugs, which can be simple and fast on the pipeline within the flow of water blocking, each air bag in the delivery of the corresponding rated working pressure before delivery and the corresponding type of diameter of the pipe to be tested, please rest assured that the purchase.

　　The pipe blocker is suitable for blocking underground drainage pipes, conducting water and air closure tests, and finding leakage points for maintenance and testing work. How to use the pipe blocker: put the blocker into the pipe mouth to be blocked, the blocker should be all put into the pipe. Then fill compressed air from the air inlet valve until the specified pressure to start construction, after the construction is completed, open the air inlet valve to release the air, remove the plugger. If it is not used for a long time, the surface of the plugger should be cleaned and then placed in a cool, dry place to save, if you find that there are air leaks, you can use an abrasive wheel to repair the place with a hair, coated with glue to cover the film hot patch.